New file uploaded to tinycad

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the tinycad
group.

File : /Libraries/FluidPower.mdb
Uploaded by : jean_demartini
Description : A fluid power systems library V1.0

You can access this file at the URL

http://uk.groups.yahoo.com/group/tinycad/files/Libraries/FluidPower.mdb

To learn more about file sharing for your group, please visit

http://help.yahoo.com/help/uk/groups/files

Regards,

jean_demartini

Comments

  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Libraries/Control.mdb
    Uploaded by : jean_demartini
    Description : Process control functional blocks V1.0

    You can access this file at the URL

    http://uk.groups.yahoo.com/group/tinycad/files/Libraries/Control.mdb

    To learn more about file sharing for your group, please visit

    http://help.yahoo.com/help/uk/groups/files

    Regards,

    jean_demartini
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Libraries/Alarmes.mdb
    Uploaded by : jean_demartini
    Description : Access and intrusion control systems V1.0

    You can access this file at the URL

    http://uk.groups.yahoo.com/group/tinycad/files/Libraries/Alarmes.mdb

    To learn more about file sharing for your group, please visit

    http://help.yahoo.com/help/uk/groups/files

    Regards,

    jean_demartini
  • Hello!
    Is any body here ?
    Can I ask some questions ;-)

    Bye.
    Valya.
  • Yep, I'm here....

    Matt.


    -----Original Message-----
    From: Valentin Kolesnikov [mailto:valentinkolesnikov@...]
    Sent: 05 January 2005 15:46
    To: tinycad@...
    Subject: [tinycad] Re: New file uploaded to tinycad




    Hello!
    Is any body here ?
    Can I ask some questions ;-)

    Bye.
    Valya
  • Hi Valya -



    I just joined the group recently, so you may know more than I do, but I will
    help if I can.



    Don Lucas

    Orikon Solutions, LLC

    11118 Grader St

    Dallas, TX 75238





    _____

    From: Valentin Kolesnikov [mailto:valentinkolesnikov@...]
    Sent: Wednesday, January 05, 2005 10:46 AM
    To: tinycad@...
    Subject: [tinycad] Re: New file uploaded to tinycad





    Hello!
    Is any body here ?
    Can I ask some questions ;-)

    Bye.
    Valya.








    Yahoo! Groups Sponsor






    _____

    Yahoo! Groups Links

    * To visit your group on the web, go to:
    http://uk.groups.yahoo.com/group/tinycad/


    * To unsubscribe from this group, send an email to:
    tinycad-unsubscribe@...



    * Your use of Yahoo! Groups is subject to the Yahoo! Terms
    of Service.
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Libraries/Memory.mdb
    Uploaded by : jaded_hobo
    Description : Memory devices (SRAM, DRAM, VRAM, EPROM, FIFO)

    You can access this file at the URL

    http://uk.groups.yahoo.com/group/tinycad/files/Libraries/Memory.mdb

    To learn more about file sharing for your group, please visit

    http://help.yahoo.com/help/uk/groups/files

    Regards,

    jaded_hobo
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Libraries/QRB1134.mdb
    Uploaded by : dhylands_99
    Description : QRD1134 reflective optical sensor

    You can access this file at the URL

    http://uk.groups.yahoo.com/group/tinycad/files/Libraries/QRB1134.mdb

    To learn more about file sharing for your group, please visit

    http://help.yahoo.com/help/uk/groups/files

    Regards,

    dhylands_99
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : TinyCAD help 2510.pdf

    Description : The latest help file for TinyCAD in pdf format.
    If needed, you can download the latest (free) version of the acrobat
    pdf reader at http://www.adobe.com

    You can access this file at the URL

    http://uk.groups.yahoo.com/group/tinycad/files/TinyCAD help 2510.pdf



    Regards,

    Wim Knevel
  • Hello,

    This email message is a notification to let you know that a file has
    been uploaded to the Files area of the tinycad group.

    File : TinyCAD help 2510.pdf

    Description : The latest help file for TinyCAD in pdf format.
    If needed, you can download the latest (free) version of the acrobat
    pdf
    reader at http://www.adobe.com

    You can access this file at the URL

    http://uk.groups.yahoo.com/group/tinycad/files/TinyCAD help 2510.pdf



    Regards,

    Wim Knevel
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /FAQ.pdf
    Uploaded by : donaldjlucas
    Description : Frequently Asked Questions

    You can access this file at the URL:
    http://uk.groups.yahoo.com/group/tinycad/files/FAQ.pdf

    To learn more about file sharing for your group, please visit:
    http://help.yahoo.com/help/uk/groups/files

    Regards,

    donaldjlucas
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Libraries/various Components/TL494C.xml
    Uploaded by : marcuswaynus
    Description :

    You can access this file at the URL:
    http://uk.groups.yahoo.com/group/tinycad/files/Libraries/various Components/TL494C.xml

    To learn more about file sharing for your group, please visit:
    http://help.yahoo.com/help/uk/groups/files

    Regards,

    marcuswaynus
  • Hello,


    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.


    File : /Resizer_Boxs_In_Schematic.jpg
    Uploaded by : maxyhopy
    Description : Unwanted resizer box keeps showing up in all of my finished schematics -Need help how to stop this from happening.


    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Resizer_Boxs_In_Schematic.jpg


    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398


    Regards,


    maxyhopy
  • Hello,


    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.


    File : /Libraries/I_use_These_Most/TCLibsMar16.zip
    Uploaded by : a10d0n


    Description : Compilation of the libraries I use to date.
    Hope they are useful
    A10D0n


    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Libraries/I_use_These_Most/TCLibsMar16.zip


    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398


    Regards,


    a10d0n

  • Since the availability of libraries seems to be an issue I thought I would upload the ones I have generated over the past years. I hope they have become more consistent over the years but there may be errors and omissions lurking.
    In general I have only made the symbols for devices I have intended to use so it is a bit of a diverse group.

    Most of the time they will link to FreePCB footprints so I will upload some of those to the Yahoo group for that.

    Hope it helps people to use this superb program.

    P.

    [To use them, download and unzip the archive to a convenient folder. Change the file names if you wish.
    In TinyCAD, click the 'Libraries...' button, then the 'Add' button and navigate to the folder with the files.
    Click to select a file and click 'Open' at the bottom of the window.
    Repeat from 'Add' for each remaining file.
    Close 'Library Setup' window and the new libraries should be ready for you to use.]

    enjoy

    P.


    ---In tinycad@yahoogroups.co.uk, wrote :

    Hello,


    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.


    File : /Libraries/I_use_These_Most/TCLibsMar16.zip
    Uploaded by : a10d0n


    Description : Compilation of the libraries I use to date.
    Hope they are useful
    A10D0n


    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Libraries/I_use_These_Most/TCLibsMar16.zip https://uk.groups.yahoo.com/neo/groups/tinycad/files/Libraries/I_use_These_Most/TCLibsMar16.zip


    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398 https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398


    Regards,


    a10d0n

  • Hello,


    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.


    File : /Libraries/Resistor Libraries Large SMD Assortment.zip
    Uploaded by : donaldjlucas
    Description : This is a relatively large assortment of SMD only resistors. Sizes range from 0402 to 2512 Imperial with metric sizes also marked. Power ranges from 1/16th W to 2W. All 1% values are thickfilm commerical or automotive grade with Digi-Key and manufacturer numbers indicated. All 0.1% values are thin film commercial or automotive grade (varies by manufacturer) with Digi-Key and manufacturer numbers indicated. Each library consists of 1 master symbol with hundreds to thousands of detail records containing all relevant parametric values and part numbers. Let me know if you need something else or in a different format. I plan to add additional manufacturers soon, also.


    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Libraries/Resistor Libraries Large SMD Assortment.zip


    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398


    Regards,


    donaldjlucas
  • Hi guys -

    I have been studying Microsoft SQL Server and database techniques and, in the process, have built a very large collection of 5 decades of EIA standard values of resistors in most commonly used SMD footprints. This uploaded file contains only 2 manufacturers and 3 total resistor line series from them. I have quite a few more of these and also the complete (and I _do_ mean complete) set of capacitors from Murata - over 13,000 components (SMD only) generated from their catalogs and SimSurfer lists.


    I am seeking comments on the format of these sample TinyCAD libraries. I have an automated method of extracting data from my new SQL Server database and producing these libraries, so please send me your comments on what you think about these and whether they will be useful to you or not. I am particularly interested in whether you think that the visible parameters are ok or whether you would like to see more or fewer parameters.


    I used the format that all symbol instances are named simply "R" and that the description contains the additional information. Because of the large number of instances, do not scroll through the list - instead, simply type the value that you would like in the search page. I used 3 significant digits everywhere in the form of 1.00K, 100, 100M, 10.0K, etc. No decimal point for hundreds of Ohms. Values less than 100 will always have a decimal point. This is the simplest way to use these libraries. Of course, if you really want to scroll through the list, be my guest - its just a lot of scrolling!


    As soon as I have gotten some feedback, I will modify the libraries and then complete the rest of them (there are several more brands, sizes, tolerances, etc than are this zip file. I would like to do the work of preparing them only once - thus my request for feedback!


    I have looked at the database in dozens of different ways, attempting to make it as error free as possible. I am not presently aware of any errors, but if you find some, please let me know. Any possible errors will be systematic type errors, not individual unique errors since these were generated directly from manufacturer lists (with only a tiny bit of help from the Digi-Key site in order to match manufacturers up with Digi-Key numbers.


    None of the capacitors have been released yet - they are much larger and more complex. The database has them all, but again, I would like to do the work of producing the TinyCAD libraries only once.


    One limitation currently - each instance contains a parameter with the name of the datasheet - this points to a directory on my personal machine that I use for other purposes in my consulting business. I haven't decided how to address this yet, but I will produce something for the TinyCAD community soon that has usable datasheets.


    Best regards,
    Don




    [Non-text portions of this message have been removed]
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Bug Files/Orientation Demo.dsn
    Uploaded by : ronwhat
    Description : Found difference between results of Rotation icons and symbol Tool Options when changing orientation of a symbol. See my post Dec 13 2018 in Bugs area. Ronwhat

    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Bug Files/Orientation Demo.dsn

    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398

    Regards,

    ronwhat
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Bug Files/VPTESTER.dsn
    Uploaded by : zojda17
    Description : This item is not connected to...

    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Bug Files/VPTESTER.dsn

    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398

    Regards,

    zojda17
  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Bug Files/VPTESTER_B.dsn
    Uploaded by : a10d0n


    Description : Modified to remove some errors

    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Bug Files/VPTESTER_B.dsn

    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398

    Regards,

    a10d0n

  • On Wed, Jan 16, 2019, 11:47 AM Hello,
    >
    > This email message is a notification to let you know that
    > a file has been uploaded to the Files area of the tinycad
    > group.
    >
    > File : /Bug Files/VPTESTER_B.dsn
    > Uploaded by : a10d0n


    > Description : Modified to remove some errors
    >
    > You can access this file at the URL:
    >
    > https://uk.groups.yahoo.com/neo/groups/tinycad/files/Bug Files/VPTESTER_B.dsn
    >
    > To learn more about file sharing for your group, please visit:
    >
    > https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398
    >
    > Regards,
    >
    > a10d0n


    >
    >
    > ------------------------------------
    >
    > ------------------------------------
    >
    >
    > ------------------------------------
    >
    > Yahoo Groups Links
    >
    >
    >
    >


    [Non-text portions of this message have been removed]

  • Hello,

    This email message is a notification to let you know that
    a file has been uploaded to the Files area of the tinycad
    group.

    File : /Desired Symbol.dsn
    Uploaded by : ronwhat
    Description : See my post about Symbol creation problem.

    You can access this file at the URL:
    https://uk.groups.yahoo.com/neo/groups/tinycad/files/Desired Symbol.dsn

    To learn more about file sharing for your group, please visit:
    https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_GB&id=SLN15398

    Regards,

    ronwhat
Sign In or Register to comment.